|
PanaVise Model 201 "Junior" Miniature Vise | 
| Brand: Panavise
Category: BISS
Department: Custom Installation
List Price: $27.99
Buy New: $16.92
as of 7/30/2010 05:28 CDT details
You Save: $11.07 (40%)
New (9)
Seller: Phantom Discounters
Rating:  11 reviews
Sales Rank: 17
Media: Tools & Hardware
Autographed: No
Memorabilia: No
Shipping Weight (lbs): 1.3
Dimensions (in): 7.5 x 6 x 4.8
Legal Disclaimer: Warranty does not cover misuse of product.
MPN: 201
Model: PV Jr Model 201
UPC: 729315201000
EAN: 0729315201000
ASIN: B000B61D22
Availability: Usually ships in 1-2 business days
| |
| Features:
| • | Easy-to-use single knob controls head movement through 3-planes: 210 degree Tilt, 360 Turn & 360 Rotation | | • | Fine/coarse adjusting knob controls jaw pressure for delicate work | | • | Grooved jaws are excellent for holding small objects and are made of reinforced thermal composite plastic | | • | Continuous heat tolerance to 350 F (177 C), intermittent heat up to 450 F (204 C) | | • | Limited Lifetime Warranty! |
| |
| Editorial Reviews:
Product Description
PanaVise is a major manufacture of Vises and Work Holding Tools. PanaVise's Tilt, Turn & Rotate technology has been applied to the product line, allowing for maximum efficiency and many different uses! All PanaVise Products are covered by a Limited Lifetime Warranty! Introducing the Panavise 201 JR, The AMAZING Mini-Vise! Perfect for arts and crafts, jewelry and model making, electronics, and other small projects! Your work is held gently, but securely, and can be positioned exactly where you want it. The easy-to-use single knob controls head movement through 3-planes: 210 degree Tilt, 360 Turn & 360 Rotation. Fine/coarse adjusting knob controls jaw pressure for delicate work. Grooved jaws are excellent for holding small objects and are made of reinforced thermal composite plastic. Continuous heat tolerance to 350 F (177 C), intermittent heat up to 450 F (204 C). Jaws are 2-Inches (50.8mm) tall, 1-Inches (25.4mm) wide, and open to 2.875-Inches (73mm). Neoprene jaw pads are available for holding extremely delicate items. Base features 4.3125-Inches (109.5mm) bolt circle countersunk for 3 1/4-Inches (6.3mm) flat-head screws (not included); compatible with all PanaVise Base Mounts. Height: 6.75-Inches (173mm), Weight: 1.2 lbs. (0.6kg). Limited Lifetime Warranty!
|
| Customer Reviews:
Showing reviews 1-5 of 11
 Pana Vise Model 201 Junior Miniature Vise July 29, 2010
G. W. Zumsteg (Sandusky, Oh. U.S.A.)
I havent gotten to use my new vise as much as I expected yet but that's my fault. The vise I have is used for holding my models while I assemble them. It gives me that third hand that someone forgot while we were being formed. I'm sure it's just an over sight that will be addressed later in our evolution ! The product in question has very delicate tightening mechanisum that can hold fragile items firmly without the danger of crushing them i. e. small parts. A little practice and you'll be a champ at putting things together in a jiffy. The jaws can be padded for extra care if needed. That's about it bye for now GZ.
 Awesome! June 24, 2010
ygd (San Diego, CA USA)
This clamp has made my life so much easier. Before, I had to tape things down to my table with scotch tape if I wanted to solder them. And there were some items that this was impossible for. Pretty much necessary for any hobbyist.
My only quib is that the plastic in the jaws deforms slightly from the heat of my soldering iron (set to 700 F). If you're careful, this won't be a problem though.
great 3rd hand tool May 24, 2010
J. Fox
I bought this guy for soldering connectors on cables and it's worked great so far. I can see the knurled plastic ball in the universal clamp possibly stripping out if you're not careful when adjusting, but like I said it works great especially for the price.
best i can find for what i use it for April 11, 2010
Carlos Cigarillo
2 out of 2 found this review helpful
this is the best clamp i have found for soldering connectors (such as XLR, RCA, DB9, etc). I also have the magnetic base and recomend it. In 10 years I have broken two of them by dropping them off a ladder. the pot metal between the ball joint and the clamps breaks. Its still the best option so I always buy another one. I feel that it is slightly overpriced.
An excellent vise for small objects March 12, 2010
Neil Forrester
1 out of 1 found this review helpful
This vise is great for those times when you wish you had 3 hands. I use it for holding circuit boards I'm working on. It can twist around to practically any orientation. I wouldn't use it to hold anything I plan on applying lots of force to, like something I wanted to cut with a hand saw, but then again, that's not what it's meant for either.
It does what it does quite well, and for a low price.
Showing reviews 1-5 of 11
|
|
|
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
| |
