ZipWall HDAZ2 Heavy Duty Zipper Kit, 2-Pack

Note: This package contains two seven-foot-long Heavy Duty Zippers and one ZipWall Zipper Knife. Just starting out? For a complete barrier system starter kit, try the ZipWall 4PL 4-Pack Plus Kit with Carry Bag, which can be used without Foam Rails on small jobs up to 30 linear feet or with Foam Rails on jobs up to 10 linear feet. For jobs up to 50 linear feet, the RLFP Facility Pack Kit with six 12-foot Poles, Caution Tape Reel System and Carry Bag is an ideal start to a barrier system (Foam Rails are not included in the RLFP and barrier material, such as plastic sheeting, must be purchased separately).

EPA-friendly, the Zipper Kit lets you create a sealable doorway in any workspace.View larger.

Press play to view an interactive product tour of the ZipWall Barrier System.

To create a ZipWall Barrier System, you must purchase one of the following pole kits: ZipWall 12-foot Spring Loaded Poles: SLP2, SLP6, RLFP Facility Packs, or 4PL 4-Pack Plus kits Zipwall 20-foot Spring Loaded Poles: KT-20 kit Suggested Tight Seal Accessories: ZipWall SDPK Side Pack ZipWall RLPK Caution Tape Reel Pack System For a complete barrier system starter kit for jobs up to 30 linear feet, try the ZipWall 4PL 4-Pack Plus Kit with Carry Bag. For jobs up to 50 linear feet, the RLFP Facility Pack Kit with six 12-foot Poles, Caution Tape Reel System and Carry Bag is ideal.

Use one zipper for a simple doorway or place two zippers side by side to create a wide roll-up doorway.

Easy to Install and Use
Installing a ZipWall Heavy Duty Zipper is easy. Simply unroll the zipper and determine where to place it on your barrier. Be sure the pull is at the bottom and the end of the zipper is below where the plastic bends as it meets the floor.

Then, starting at the top, peel the backing off the zipper and press the zipper firmly onto the sheeting.

When the zipper is in place, open it completely and cut the opening with the included ZipWall Zipper Knife. This handy knife cuts a 3/4-inch-wide channel in the plastic sheeting, so the zipper teeth won't catch on the sheeting and bind.

Works with All ZipWall Products
The ZipWall Heavy Duty Zipper can be used as part of a ZipWall Barrier System. By purchasing ZipWall 12-foot SLP poles or 20-foot KT-20 poles and ZipWall Tight Seal accessories, you can create a dust barrier without marring walls or ceilings. You can also purchase the ZipWall 4PL 4-Pack Plus Kit with Carry Bag or the RLFP Facility Pack with Caution Tape Reel System and Carry Bag. Both include everything you need to create a ZipWall Barrier System.

Protect Children and Property from Lead-Dust Contamination
Providing a dust-tight seal around worksites is very important, especially when doing demolition or when renovating an older home that has lead paint. In fact, the Environmental Protection Agency (EPA) mandates that dust be contained when as little as six square feet of lead paint is disturbed in homes or facilities where there are children under six years old.

Go to www.epa.gov/lead to get details on the latest lead-safety rules and lead-safe work practices. New EPA laws are an important reason to keep a ZipWall Barrier System on hand.

What's in the Box
ZipWall HDAZ2 Heavy Duty Zipper kit with two seven-foot-long Heavy Duty Zippers and one ZipWall Zipper Knife

Installation is simple. Unroll the zipper, peel off the backing, and place it on the barrier.	Watch the Heavy Duty Zipper contractor interviews.
	Watch the Heavy Duty Zipper demo video.